dmesg - 1st Run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfe5abff] usable
BIOS-e820: [mem 0x00000000cfe5ac00-0x00000000cfe5ebff] ACPI NVS
BIOS-e820: [mem 0x00000000cfe5ec00-0x00000000cfe60bff] ACPI data
BIOS-e820: [mem 0x00000000cfe60c00-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. OptiPlex 330 /0KP561, BIOS A11 05/31/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x12c000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0CFF00000 mask FFFF00000 uncachable
1 base 0D0000000 mask FF0000000 uncachable
2 base 0E0000000 mask FE0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xcfe5a max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x12be00000-0x12bffffff]
[mem 0x12be00000-0x12bffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x128000000-0x12bdfffff]
[mem 0x128000000-0x12bdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x127ffffff]
[mem 0x100000000-0x127ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfe59fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfe59fff] page 4k
RAMDISK: [mem 0x35ba2000-0x36dc8fff]
ACPI: RSDP 00000000000febf0 000024 (v02 DELL )
ACPI: XSDT 00000000000fd033 00007C (v01 DELL B9K 00000015 ASL 00000061)
ACPI: FACP 00000000000fd153 0000F4 (v03 DELL B9K 00000015 ASL 00000061)
ACPI: DSDT 00000000fff60c17 00332A (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 00000000cfe5ac00 000040
ACPI: SSDT 00000000fff6410e 000088 (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fd247 000092 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: BOOT 00000000000fd2d9 000028 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: ASF! 00000000000fd301 000092 (v32 DELL B9K 00000015 ASL 00000061)
ACPI: MCFG 00000000000fd393 00003E (v01 DELL B9K 00000015 ASL 00000061)
ACPI: HPET 00000000000fd3d1 000038 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: SLIC 00000000000fd409 000176 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: SSDT 00000000cfe5ac40 0001B7 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
ACPI: SSDT 00000000cfe5b049 0001B7 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
ACPI: SSDT 00000000cfe5b452 000140 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012bffffff]
Initmem setup node 0 [mem 0x00000000-0x12bffffff]
NODE_DATA [mem 0x12bff7000-0x12bffbfff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880127600000-ffff88012b5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcfe59fff]
node 0: [mem 0x100000000-0x12bffffff]
On node 0 totalpages: 1031672
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13242 pages used for memmap
DMA32 zone: 847450 pages, LIFO batch:31
Normal zone: 2816 pages used for memmap
Normal zone: 180224 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfe5a000-0xcfe5afff]
PM: Registered nosave memory: [mem 0xcfe5b000-0xcfe5dfff]
PM: Registered nosave memory: [mem 0xcfe5e000-0xcfe5efff]
PM: Registered nosave memory: [mem 0xcfe5f000-0xcfe5ffff]
PM: Registered nosave memory: [mem 0xcfe60000-0xcfe60fff]
PM: Registered nosave memory: [mem 0xcfe61000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88012bc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015529
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3958948K/4126688K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 167740K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1993.550 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.10 BogoMIPS (lpj=7974200)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7974.20 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfe5ac00-0xcfe5ebff] (16384 bytes)
reboot: Dell OptiPlex 330 series board detected. Selecting BIOS-method for reboots.
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 0:30:48, date: 05/18/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xff980800-0xff980bff]
pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xdfffc000-0xdfffffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xff20-0xff3f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfecf]
pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9703ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff]
pci 0000:01:00.0: [10de:104a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdc80-0xdcff]
pci 0000:01:00.0: reg 0x30: [mem 0xdfe00000-0xdfe7ffff pref]
pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdfdfc000-0xdfdfffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:02:00.0: [14e4:169b] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xddff0000-0xddffffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xddf00000-0xddffffff]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff980800-0xff980bff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9703ff]
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe5ac00-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
system 00:00: [io 0x0c00-0x0c7f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xda000000-0xda1fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1f.2: BAR 5: assigned [mem 0xda200000-0xda2003ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xddf00000-0xddffffff]
pci 0000:00:1c.0: bridge window [mem 0xda000000-0xda1fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff]
pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdfefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xddf00000-0xddffffff]
pci_bus 0000:02: resource 2 [mem 0xda000000-0xda1fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:03: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:03: resource 9 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:03: resource 10 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:03: resource 11 [mem 0xff980800-0xff980bff]
pci_bus 0000:03: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:03: resource 13 [mem 0xfed20000-0xfed9ffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18588K (ffff880035ba2000 - ffff880036dc9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbe5a000-0xcfe5a000] (64MB) mapped at [ffff8800cbe5a000-ffff8800cfe59fff]
Simple Boot Flag at 0x7a set to 0x1
microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa4
microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa4
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1400373047.900:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata2: port disabled--ignoring
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ata1: port disabled--ignoring
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xff980800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:818:506
rtc_cmos 00:04: setting system clock to 2014-05-18 00:30:49 UTC (1400373049)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[113]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.134 (Sep 16, 2013)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xda200000 port 0xda200100 irq 42
ata4: SATA max UDMA/133 abar m1024@0xda200000 port 0xda200180 irq 42
ata5: SATA max UDMA/133 abar m1024@0xda200000 port 0xda200200 irq 42
ata6: SATA max UDMA/133 abar m1024@0xda200000 port 0xda200280 irq 42
tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95787) rev b002] (PCI Express) MAC address 00:1d:09:22:ff:a8
tg3 0000:02:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
ata4.00: configured for UDMA/100
usb 1-1: New USB device found, idVendor=2304, idProduct=021a
usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1: Product: DVC100
usb 1-1: Manufacturer: Pinnacle Systems GmbH
ata3.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133
ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3160815AS 3.AD PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb 1-3: new high-speed USB device number 3 using ehci-pci
sda: sda1 sda2 sda3 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 1993.547 MHz
usb 5-1: new full-speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=1997, idProduct=2433
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Mini Keyboard
usb 5-1: Manufacturer:
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Mini Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4
hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [ Mini Keyboard] on usb-0000:00:1d.3-1/input0
input: Mini Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input5
hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [ Mini Keyboard] on usb-0000:00:1d.3-1/input1
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-3.1: new low-speed USB device number 5 using ehci-pci
usb 1-3.1: New USB device found, idVendor=046d, idProduct=c216
usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.1: Product: Logitech Dual Action
usb 1-3.1: Manufacturer: Logitech
input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input6
hid-generic 0003:046D:C216.0003: input,hidraw2: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:00:1d.7-3.1/input0
Switched to clocksource tsc
random: nonblocking pool is initialized
Adding 4124668k swap on /dev/sda5. Priority:-1 extents:1 across:4124668k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[299]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[drm] Initialized drm 1.1.0 20060810
lp0: using parport0 (interrupt-driven).
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
type=1400 audit(1400373068.825:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=423 comm="apparmor_parser"
type=1400 audit(1400373068.825:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=423 comm="apparmor_parser"
type=1400 audit(1400373068.825:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
type=1400 audit(1400373068.825:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=423 comm="apparmor_parser"
type=1400 audit(1400373068.825:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
type=1400 audit(1400373068.825:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Linux video capture interface: v2.00
autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x14
Line=0x15
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
gpio_ich: GPIO from 206 to 255 on gpio_ich
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
init: failsafe main process (626) killed by TERM signal
em28xx: New device Pinnacle Systems GmbH DVC100 @ 480 Mbps (2304:021a, interface 0, class 0)
em28xx: Video interface 0 found: bulk isoc
em28xx: chip ID is em2710/2820
em2710/2820 #0: i2c eeprom 00: 1a eb 67 95 04 23 1a 02 12 00 11 03 98 10 6a 2e
em2710/2820 #0: i2c eeprom 10: 00 00 06 57 4e 00 00 00 60 00 00 00 02 00 00 00
em2710/2820 #0: i2c eeprom 20: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
em2710/2820 #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00
em2710/2820 #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2710/2820 #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2710/2820 #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00
em2710/2820 #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
em2710/2820 #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00
em2710/2820 #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 10 03 44 00 56 00 43 00
em2710/2820 #0: i2c eeprom a0: 31 00 30 00 30 00 00 00 32 00 30 00 33 00 35 00
em2710/2820 #0: i2c eeprom b0: 36 00 30 00 37 00 35 00 31 00 33 00 34 00 31 00
em2710/2820 #0: i2c eeprom c0: 30 00 32 00 30 00 30 00 30 00 31 00 00 00 32 00
em2710/2820 #0: i2c eeprom d0: 33 00 31 00 32 00 33 00 00 00 00 00 00 00 00 00
em2710/2820 #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em2710/2820 #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 b3 d4 60 01 b3 b5 56 07
em2710/2820 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0xc6a61888
em2710/2820 #0: EEPROM info:
em2710/2820 #0: AC97 audio (5 sample rates)
em2710/2820 #0: 300mA max power
em2710/2820 #0: Table at offset 0x06, strings=0x1098, 0x2e6a, 0x0000
em2710/2820 #0: Identified as Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U (card=9)
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1400373069.861:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=713 comm="apparmor_parser"
type=1400 audit(1400373069.861:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=713 comm="apparmor_parser"
type=1400 audit(1400373069.861:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=713 comm="apparmor_parser"
type=1400 audit(1400373070.053:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=776 comm="apparmor_parser"
saa7115 0-0025: saa7113 found @ 0x4a (em2710/2820 #0)
init: cups main process (749) killed by HUP signal
init: cups main process ended, respawning
tg3 0000:02:00.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
em2710/2820 #0: Config register raw data: 0x12
em2710/2820 #0: AC97 vendor ID = 0x83847652
em2710/2820 #0: AC97 features = 0x6a90
em2710/2820 #0: Sigmatel audio processor detected(stac 9752)
em2710/2820 #0: v4l2 driver version 0.2.0
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x3d4 offMax=0x116c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: samba-ad-dc main process (944) terminated with status 1
tg3 0000:02:00.0 eth0: Link is up at 10 Mbps, half duplex
tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
em2710/2820 #0: V4L2 video device registered as video0
em2710/2820 #0: analog set to isoc mode.
em28xx audio device (2304:021a): interface 1, class 1
em28xx audio device (2304:021a): interface 2, class 1
usbcore: registered new interface driver em28xx
usbcore: registered new interface driver snd-usb-audio
nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
init: udev-fallback-graphics main process (1903) terminated with status 1
init: plymouth-splash main process (1921) terminated with status 1
HDMI: invalid ELD data byte 9
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1400373102.722:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3078 comm="apparmor_parser"
type=1400 audit(1400373102.722:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3078 comm="apparmor_parser"
type=1400 audit(1400373102.722:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3078 comm="apparmor_parser"
perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000